This is the next step up for creating that awesome Cyclic system. These resin prints are heavy and are very similar to how the cyclic grip feels in the aircraft. The resin prints come out gorgeous and are almost ready to paint. I have included my finished print once painted in the last photo. 
 
I have included as many photos as possible regarding what you will receive.  To keep the price down to a minimum. The parts are washed and cured only. The under areas where the support was attached (where you also can't see when it's fitted) requires a gentle sanding with 300 grit sandpaper, followed by 600 Grit. Be gentle; resin sands very easily and quickly!
 
Once sanded to your liking, It's time for you to paint the part. For my cyclic grip, I used Jenolite primer (Black - 1 coat), followed by Jenolite Black Gloss
 (1 coat). 24 hours later, I applied a clear gloss lacquer to seal all (not required), but it does stop fingerprints from showing!
 
I have secured the parts together with the screws to stop any warping. The lower 5mm attachment bolt to the cyclic tube will still require sourcing.
 
This product has come about due to the number of requests for it. I have been very hesitant in creating this item due to cost. They are time-consuming in both manpower and print time (22Hrs) combined with resin costs.