Garmin G1000 & G1000 NXI

Print Guide:

Garmin G1000 & G1000 NXI

B1 Bottom Frame

QTY:01
Material: PLA
ETC: 4 hrs

Colour: White
Infill:25%
Support: On (Touching Build Plate)
Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

S3 Support Frame

QTY:01
Material: PLA
ETC: 8 hrs

Colour: ANY
Infill:25%
Support: On (touching buildplate)
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft, (helps to remove the support material)
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

R9 Vol Knob

QTY:03
Material: PLA
ETC: 1 hrs

Colour: Black
Infill:25%
Support: On (touching build plate)
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

B2 Arrow Button

QTY:12
Material: PLA
ETC: 4 hrs

Colour: White
Infill:25%
Support: Off
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

S2 LHS support

QTY:01
Material: PLA
ETC: 2 hrs

Colour: Any
Infill:25%
Support: On (touching build plate)
Nozzle: 0.4mm
Layer height: 0.2mm
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

R8 Backplate

QTY:02
Material: PLA
ETC: 1 hrs

Colour: Any
Infill:25%
Support: On (touching build plate)
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

L1 & R1 Frames

QTY:01
Material: PLA
ETC: 8 hrs

Colour: White
Infill:25%
Support: On (touching buildplate)
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

S1 RHS Support

QTY:01
Material: PLA
ETC: 1 hrs

Colour: Any
Infill:25%
Support: On (touching buildplate)
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

L8 HDG KNOB

QTY:01
Material: PLA
ETC: 1 hrs

Colour: Black
Infill:25%
Support: On (touching build plate)
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt (Raft may produce better results)
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

S4 Arduino Mount

QTY:01
Material: PLA
ETC: 1 hrs

Colour: Any
Infill:25%
Support: OFF
Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

M1 Tri knob

QTY:01
Material: PLA
ETC: 1 hrs

Colour: Black
Infill:25%
Support: On (touching buildplate)
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

L5 Dual Knob Lower

QTY:03
Material: PLA
ETC: 1 hrs

Colour: Black
Infill:25%
Support: On (touching build plate)
Nozzle: 0.4mm (0.2 recommended)
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt (Raft may produce better results)
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: