top of page

Print Guide:

Boeing 737 MTU Base

3d prining.png
RH Yoke Head Body (1).PNG

1 Base

QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.32mm, ETC: 4 days
Nozzle:0.8mm, Layer height: 0.64mm, ETC 22 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

6 Clamp Large

QTY:1
Material: PLA
Colour: Dark Grey
Infill:20%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:2 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 6 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

2 & 3 Side Panels

QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: None
Nozzle: 0.4mm, Layer height: 0.32mm, ETC: 2 days
Nozzle:0.8mm, Layer height: 0.64mm, ETC 10hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

7 BOB holder

QTY:1
Material: PLA
Colour: Any
Infill:20%
Support: ON - Everywhere
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:4 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 2 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

4 Arduino & Leobodnar Mount

QTY:1
Material: PLA
Colour: Dark Grey
Infill:15%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:10 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 3 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

5 Small Clamp

QTY:1
Material: PLA
Colour: Dark Grey
Infill:20%
Support: ON - Everywhere
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.32mm, ETC:4 hours
Nozzle:0.8mm, Layer height: 0.64mm, ETC 1 hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm

Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

bottom of page