Boeing 737 Motorised Throttle3

Tw1 LH End Cap & TW8 RH End Cap

QTY:1
Material: PLA

Colour: D.Grey
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW5 & TW12 Stepper Mount

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw15 Trim Wheel White

QTY:2
Material: PLA

Colour: White
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW19 & TW20 Plate

QTY:2
Material: PLA

Colour: Black
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW21, TW22, TW26 Bearing Caps

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw36 mins Plate

QTY:1
Material: PLA

Colour: D.Grey
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW2 & TW9 Spur Gear 90T

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW6 & TW13 Spur Gear 48T

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw16 Push Block

QTY:2
Material: PLA

Colour: D.Grey
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW23, Tw24, Tw25 Pinion Inserts

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - Touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW 29 FCO Decal

QTY:1
Material: PLA

Colour: White
Infill:15%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw37 Max Plate

QTY:1
Material: PLA

Colour: D.Grey
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW3 & TW10 Spur Gear 100T

QTY:1
Material: PLA

Colour: Any
Infill:40%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw7 Spacer

QTY:2
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW17 Cap

QTY:2
Material: PLA

Colour: Black
Infill:60%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW27 Spur Gear 22T

QTY:2
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW30, TW32, TW 34 Rub Strip

QTY:1
Material: PLA

Colour: Dark Grey
Infill:15% Less if you want brighter light diffusion.
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW4 & Tw 11 Sliding Plate

QTY:1
Material: PETG or ABS (if applying power/heat) PLA for non motorised units

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW14 Trim Wheel Black

QTY:2
Material: PLA

Colour: Black
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW18 Handle

QTY:2
Material: PLA

Colour: Black
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

TW28 Spur Gear 44t

QTY:1
Material: PLA

Colour: Any
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Tw31, Tw 33, Tw35 Rubber Strip

QTY:1
Material: PLA-Flexible

Colour: Black
Infill:25%
Support: ON - touching Buildplate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: