Boeing 737 Dual Control Column, Roll Channel - Metal Gear, adjustable Version.

Print Guide:

Boeing 737 Dual Control Column, Roll Channel - Metal Gear, adjustable Version.

(1) Yoke Head Coupling Shaft x2

Material: ABS preferred, PLA will work

Support: ON (Touching Build Plate)

Adhesion: Skirt (3mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(5) Half Moon Clamp x4

Material: ABS preferred, PLA will work

Support: ON

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(9) Slider Support x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:40% Min

(12) FO TQ SHFT LWR Adpt x1

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(15) Centering Housing x1 ALT

ALTERNATIVE ORIENTATION MAKING USE OF THE LAYER LINES FOR EXTRA STRENGTH
QTY:1
Material: PLA/ABS/PETG
Colour: Any
Infill:100%
Support: ON - EVERYWHERE
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm ETC: 2 DAYS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

(19) Outboard Finger x2

Material: ABS preferred, PLA will work

Support: ON

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(23) Bearing Hanger x1

Material: ABS preferred, PLA will work

Support: ON

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(2) Yoke Tq Shaft Upper Adapter x2

Material: ABS preferred, PLA will work

Support: ON (Touching Build Plate)

Adhesion: Skirt (3mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(6) CTRL FRME BRG HGR x2

Material: ABS preferred, PLA will work

Support: ON (Everywhere)

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:40% Min

(10) BRG HGR STOP x2

QTY:1
Material: PLA
Colour: Any
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

(13) FO ADPT SHFT STOP x1

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(16) Centering Shaft x1

Material: ABS preferred, PLA will work

Support: ON (EVERYWHERE)

Adhesion: RAFT (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(20) Bearing Hanger Hall Sensor x1

Material: ABS preferred, PLA will work

Support: ON (EVERYWHERE)

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(24) CENTERING ADAPTER

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(3) Tq Shaft Lower Adpt x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(7) CTRL FRME Spacer x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(10) BRG HGR STOP x2 ALT

ALTERNATIVE ORIENTATION MAKING USE OF THE LAYER LINES FOR EXTRA STRENGTH
QTY:1
Material: PLA/ABS/PETG
Colour: Any
Infill:100%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm ETC: 20 HRS
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

(14) FO Adapter x1

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(17) Tensioner x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(21) Hall Gear

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(4) Shaft spacer 3mm x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Skirt

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(8) Bearing Slider x2

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:40% Min

(11) Adapter Shaft STOP x1

Material: ABS preferred, PLA will work

Support: ON

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(15) Centering Housing x1

QTY:1
Material: PLA/PETG/ABS
Colour: Any
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

(18) Centre Finger x2

Material: ABS preferred, PLA will work

Support: ON (EVERYWHERE)

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

(22) Hall Adapter x1

Material: ABS preferred, PLA will work

Support: OFF

Adhesion: Brim (8mm)

Nozzle: 0.4mm

Speed: 30mm/s

Layer Height: 0.2mm

Infill:100%

Print Guide: