top of page

Print Guide:

737SS MIP Screen Frames

3d prining.png
RH Yoke Head Body (1).PNG

SF1 Main Frame

QTY:1
Material: PLA
Colour: Dark Grey
Support: ON
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm (if you want awesomeness, switch to 0.12 layer height)

ETC: 22 Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

RH Yoke Head Body (1).PNG

SF2 Knob

QTY:1
Material: PLA
Colour: Dark Grey
Support: ON
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm (if you want awesomeness, switch to 0.12 layer height)

ETC: 1Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

bottom of page