_PNG.png)
1 Main Case
QTY:1
Material: PLA
Colour: Dark Grey
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 8 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
7/8 LED Stand off
QTY:2 Each
Material: PLA
Colour: Any
Infill:20%
Support: OFF
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
2 Faceplate
QTY:1
Material: PLA
Colour: Dark/Grey & White or all white if sanding back
Infill:20%
Support: OF
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.12mm
ETC: 14 Hours
A high-quality laser-etched replacement part can be found here:
https://www.737diysim.com/product-page/737ss-afds-laser-etched-panel-upgrade
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
9 AFDS Button case
QTY:3
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
3/4/5 Lenses
QTY:1
Material: PLA
Colour: Clear/Transparent
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.2mm, Layer height: 0.12mm
ETC: 2 Hours
A high-quality laser-etched replacement part can be found here:
https://www.737diysim.com/product-page/737ss-afds-laser-etched-panel-upgrade
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
10 PCB Print
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 13 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
6 Diffuse lens
QTY:3
Material: PLA
Colour: Clear/ or white
Infill:2-5%
Support: OFF
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 1 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active
_PNG.png)
11 Back Shell
QTY:1
Material: PLA
Colour: Black
Infill:20%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm
ETC: 5 Hours
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active