737 3D Printed Rudder Pedals

Print Guide:

737 3D Printed Rudder Pedals

1 Buggy Base

QTY:1
Material: PLA
Colour: Any
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 2 Days
OR
Nozzle: 0.8mm, Layer height: 0.64mm ETC: 12Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

7&8 Pedal Support Arms

QTY:1 Each (Layer Line Orientation important!)
Material: PLA
ETC: 10Hr
Colour: Grey or Black
Infill:40%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

14&15 Spring Levers

QTY:1 Each
Material: PLA
ETC: 1Hr
Colour: Any
Infill:40%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: ActiveSupport: ON - Touching Build Plate

19 Tie Rod

QTY:4 (Important, Make sure the ball part moves after printing!)
Material: PLA
ETC: 2Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 30mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

23 Pot Bracket

QTY:1
Material: PLA
ETC: 1Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

26&29 Rear FootPlates

QTY:1 Each
Material: PLA
Colour: Dark Grey
Infill:40%
Support: OFF
Adhesion: RAFT
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 1 DAY 14 HRS
OR
Nozzle: 0.8mm, Layer height: 0.64mm ETC: 11Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

34 Tower Centre Rear

QTY:1
Material: PLA
ETC: 1 DAY
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

38 Knob

QTY:1
Material: PLA
ETC: 1Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

2 Shim

QTY:2
Material: PLA
Colour: Any
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.2mm ETC: 18 Minutes

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

9 Spur Gear

QTY:2
Material: PLA
Colour: Any
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 18 mins

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

16 Front Bearing Housing

20 Sync Lever

QTY:1
Material: PLA
ETC: 4Hr
Colour: Any
Infill:40%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

24 Sync Bracket

QTY:1
Material: PLA
Colour: Grey or Black
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Raft
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 12 HRS
OR
Nozzle: 0.8mm, Layer height: 0.4mm ETC: 4Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

31 Tower Front Lower

35 Tower Upper Rear

39 Knob Arm

3&4 Pedal Stems

QTY:1 Each
Material: PLA
Colour: Any
Infill:60%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 22 Hours
OR
Nozzle: 0.8mm, Layer height: 0.64mm ETC: 4Hours

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

10&11 Pedals

QTY:1 EACH - EPIC PRINT! (Layer Orientation Important)
Material: PLA
ETC: 4 Days Each!
Colour: Dark Grey
Infill:40%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended for a fantastic finish)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

17 Bearing Covers

QTY:2
Material: PLA
ETC: 1Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

21 Sync LVR BRG Cap

25&30 Centre Footplates

32 Tower Rear Lower

36 Pedal ADJ Structure

QTY:1
Material: PLA
ETC: 8 Hrs
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

40 ADJ Panel

5&6 Brake Plates

QTY:1
Material: PLA
Colour: Grey or Black
Infill:40%
Support: ON - Touching Build Plate
Adhesion: Skirt
Nozzle: 0.4mm, Layer height: 0.3mm ETC: 4 Hrs

Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Print Speed: 40mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

12&13 Restraint Bar

QTY:2
Material: PLA
ETC: 1Hr
Colour: Grey or Black
Infill:40%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

18 Rear Bearing Housing

QTY:1
Material: PLA
ETC: 2Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

22 Spur Gear

QTY:1
Material: PLA
ETC: 1Hr
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Raft
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

27&28 Front Footplates

33 Tower Centre front

37 Tower Upper Forward

QTY:1
Material: PLA
ETC: 18 Hrs
Colour: Any
Infill:25%
Support: ON - Touching Build Plate

Nozzle: 0.4mm
Layer height: 0.2mm (0.12 recommended)
Support Pattern: Concentric
Support Density: 10%
Support Z Distance: 0.2mm
Support X/Y Distance: 1.0mm
Adhesion: Skirt
Print Speed: 50mm/s
Infill Speed: 80mm/s
Support Speed: 60mm/s
Initial Layer Speed:15 mm/s
Number of slower layers: 2
Experimental Conical Support: Active

Print Guide: